Scale Models of Slate Pickup, SUV, Fastback (for DIY 3D Print - STL Files)

[skidoofast]

Here are the STL files for the 3D Print Slate Pickup and SUV scale models. I combined the Rim and Tire so it can be printed all as one.

Pickup Model: https://www.slateforums.com/forum/attachments/slate-truck-stl-stl.37847/
SUV Model: https://www.slateforums.com/forum/attachments/slate-suv-model-stl-stl.37846/
Fastback Model: https://www.slateforums.com/forum/attachments/slate-fastback-model-stl-stl.37857/
Wheels: https://www.slateforums.com/forum/attachments/wheel-and-rim-stl.37848/

 

[skidoofast]

Added the Fastback Model to the lineup

 

[cvollers]

Here are the STL files for the 3D Print Slate Pickup and SUV scale models. I combined the Rim and Tire so it can be printed all as one.

Pickup Model: https://www.slateforums.com/forum/attachments/slate-truck-stl-stl.37847/
SUV Model: https://www.slateforums.com/forum/attachments/slate-suv-model-stl-stl.37846/
Fastback Model: https://www.slateforums.com/forum/attachments/slate-fastback-model-stl-stl.37857/
Wheels: https://www.slateforums.com/forum/attachments/wheel-and-rim-stl.37848/

Perfect…now I can import it into SketchUp and get designing.

 

[Swinefuzz]

I was literally googling around for an stl last night.

 

[skidoofast]

I was literally googling around for an stl last night.

I found the slate pickup, printed it, had to modify the wheels

then I added the topper and then modified the topper into the fastback

 

[skidoofast]

 

[Swinefuzz]

Serious visualization and manifestation vibes makin' the dream real

 

[slateya]

A little rough but after a few tries, I now have a Slate truck looking 3D printed desklet. It would look better in Slate gray.

 

[skidoofast]

A little rough but after a few tries, I now have a Slate truck looking 3D printed desklet. It would look better in Slate gray.

Looks awesome, I stare at mine when I go into my office and I just can’t wait to get the real thing

 

[Void_man]

I made my own versions over the weekend if anyone would like one of made in the likeness of their preordered vehicle. https://www.etsy.com/listing/431095...f198ba2a76c6af3a1c86fde3e519921e98:4310959880

 

[skidoofast]

now have 3 printed

 

[MichaelZ]

not to discredit your work, thank you for bringing the truck to 3d-printable form...
but my god, this is some seriously scuffed topology if ive ever seen some.
im using bambu studio, and this specific topology created a giant gap in the rear wheel humps :/

 

[skidoofast]

The base model was downloaded from one of the stl sights, I just added the topper and fastback

you are correct there is a gap but it’s fine for my shelf

 

[Trace26]

Y'all need to lower your layer height or use adaptive layer height. Thanks for the model tho

 

[reagan141014]

For anyone interested, you can alleviate the layer steps on the hood pretty well by printing the Slate in a "grill up" configuration, at least for the SUV models. This was done with a cheap Creality printer with probably only 10 minutes of support removal and cleanup. The grill, the backend, and the fender wells are really the only parts that I wish turned out better.