What's the Slate's maintenance like?

E90400K

Well-Known Member
First Name
Francis
Joined
Apr 26, 2025
Threads
5
Messages
118
Reaction score
157
Location
Middle of the Mid Atlantic
Vehicles
A Ford truck
To the contrary, It's been answered pretty well.





Normal ICE-related automotive maintenance expenses and hassles (oil changes, transmission service, timing belts, etc.) won't be necessary. Brakes probably won't wear out, too.

If Slate does what they're setting out to do, we should be able to expect very low maintenance requirements for a good long while.

@Trace26 provides a bonus salient point:



To me, this insight means a used Slate Truck is a less risky used-car purchase than one with an ICE engine because lack-of-maintenance risk exists for the ICEV that doesn't exist for the EV.



Are you speculating that the Slate will require some maintenance that other EVs don't require?
Information about the Slate maintenance requirements has not been definatively answered at all. Posters here have extrapolated what the maintenance may be based on other EV brands maintenance requirements.

All speculation at this point.
 
Last edited:

SlatePossible2028

Well-Known Member
First Name
FD
Joined
May 4, 2025
Threads
2
Messages
79
Reaction score
82
Location
Central IL
Vehicles
2010 Grand Marquis, 2001 F150, 1966 Ranchero, 2004 Mazda RX8
Let's be clear here though. Sure plenty of engines are capable of achieving unnecessarily (from a manufacturer perspective) high mileage... But all of that moving part longevity comes at a not insubstantial lifetime preventative maintenance cost.

BMW has some of the neediest engines I've experienced from a preventative maintenance standpoint. Beyond the typical (many) oil/filter changes and whatnot, never before owning an N52 did I have ANY engine need an 'oil filter housing' (dumb non-integrated design) gasket, valve cover gasket, and oil pan gasket replaced every 100k or so. I'm not sure why, but they couldn't engineer a gasket rubber to save their lives, despite other manufacturers having figured it out decades ago. Same with the ~100k limited-life electric water pump and thermostat. The whole ownership experience was best summed up by 'so close, yet so far'.

I mean, Subaru fanbois can brag that their EJ25 has 300k longevity too... It just needs to be fed a steady diet of head gaskets. :CWL:
My E46 ate thru gaskets and plastics like there was no tomorrow. My old WJ had 300k+ on it and my E46 had only 220k and was babied prior to me owning it, and after every spirited drive something would break/leak lol.

On the plus side, it was quite modular in many aspects. Water pump in it only took me like 20 min

I regret selling that car, solely because I miss having an AutoX/Drift pig. But now I have an RX8 for that lol
 

SlatePossible2028

Well-Known Member
First Name
FD
Joined
May 4, 2025
Threads
2
Messages
79
Reaction score
82
Location
Central IL
Vehicles
2010 Grand Marquis, 2001 F150, 1966 Ranchero, 2004 Mazda RX8
Something about these discussions people seem to miss

The only "less moving parts" things that EVs have over gas vehicles is generally an engine and a traditional transmission setup. And in a gas vehicle, generally these are not an issue unless there's a defect or mishap which usually falls under a recall/warranty, and isn't yours to pay. See current GM oil and bearing issues, Kia/Hyundai engine issues, Toyota engine issues, etc.

Electric cars still have ball joints, axles, various suspension components, brake lines and components, etc. Some have a sort of gearbox setup. And then of course there is the battery, which is the big failure point of most EVs and generally isn't something one can do on their own, unlike most work on gas vehicles. The battery also has some...questionable disposal practices, whereas all of the fluids from a gas car are easily recycled

Generally speaking the only real savings over time with an EV is gas. Also I don't think the Slate will suffer from the brake/tire degradation that plagues other EVs, since iirc its relatively light for an EV.


And then you get into the whole "yeah if Slate flops in 3 years you're left with a nice pickup truck shaped doorstop if something manufacturer specific fails"
 

Trace26

Well-Known Member
First Name
Trace
Joined
Jun 8, 2025
Threads
3
Messages
99
Reaction score
106
Location
Texas
Vehicles
Mazda CX-90
And then you get into the whole "yeah if Slate flops in 3 years you're left with a nice pickup truck shaped doorstop if something manufacturer specific fails"
Luckily Slate uses all "off the shelf" parts and says they will release the documentation, so you will be able to find parts. It won't be as easy as calling up a dealer but it should definitely be doable.
 

AZFox

Well-Known Member
Joined
Apr 29, 2025
Threads
10
Messages
442
Reaction score
583
Location
Arizona
Vehicles
Honda NC700X
 
Top