Exterior care

[mrjameszmijewski]

The cars i have owned all the exteriaor black plastic trim has faded to grey...

Looking for a list of cleaners/coatings/finishes safe to use on the composite panels and wraps

non-wax car wash / brushless car wash

chemical guys make a wrap detailer / 303 graphoine detailer

then do i want a ceramic or graphine

303 graphine trim coating /303 graphine nono spray?

-- does the wrap manufacture have recomendation?

 

[rday1525]

I'm also concerned about anything not wrapped fadding or getting that white powdery effect over time.

 

[TheMagician]

Fear of fading is why I'm going to wrap the A pillars. Not sure why the partial roof kit doesn't include that area. Hopefully they'll sell me enough material to do it, otherwise have to buy a second kit.

 

[mrjameszmijewski]

The cars i have owned all the exteriaor black plastic trim has faded to grey...

Looking for a list of cleaners/coatings/finishes safe to use on the composite panels and wraps

non-wax car wash / brushless car wash

chemical guys make a wrap detailer / 303 graphoine detailer

then do i want a ceramic or graphine

303 graphine trim coating /303 graphine nono spray?

-- does the wrap manufacture have recomendation?

https://a.co/d/0gxOOTRc
303 Graphene Detailer Spray


with

https://a.co/d/0iun9x9g
303 Graphene Nano Spray Coating



?

 

[TheMagician]

Love 303 products. I’ve used this one for years on mostly the Interior plus plastic trim on the outside. First found out about it from a friend that had a small plane, evidently it’s popular among that group who are always searching for the best products. And yes, I grew up on Armor All and STP Son of a Gun like a lot of you but this is a much better product and dries to a matte, non greasy finish.

https://www.amazon.com/dp/B00L4TF32G?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2

 

[helifino16]

Everyone with a Jeep or Bronco experiences this regularly (roof, fender flares, etc.). There's plenty of surface coatings that will restore to Black (not gray/charcoal), but I have a feeling the there will be plenty of options available when these hit the streets. Simple Armor All will also solve this issue for some people.

 

[AZFox]

https://a.co/d/0gxOOTRc
303 Graphene Detailer Spray


with

https://a.co/d/0iun9x9g
303 Graphene Nano Spray Coating



?

Clean Link:
303 Graphene Detailer Spray for Paint & Coatings, 16 oz
https://www.amazon.com/dp/B09LVR44VX
Removed:
?_encoding=UTF8&psc=1&ref=cm_sw_r_cp_ud_dp_7W4ZHZHQH7680HBQC41P&ref_=cm_sw_r_cp_ud_dp_7W4ZHZHQH7680HBQC41P&social_share=cm_sw_r_cp_ud_dp_7W4ZHZHQH7680HBQC41P

Clean Link:
303 Graphene Nano Spray Coating for Cars, 15.5 oz
https://www.amazon.com/dp/B08K3N5QP5
Removed:
?_encoding=UTF8&psc=1&ref=cm_sw_r_cp_ud_dp_JNK2MDXGPRPH8DY899JC&ref_=cm_sw_r_cp_ud_dp_JNK2MDXGPRPH8DY899JC&social_share=cm_sw_r_cp_ud_dp_JNK2MDXGPRPH8DY899JC

 

[WolfWings]

Fear of fading is why I'm going to wrap the A pillars. Not sure why the partial roof kit doesn't include that area. Hopefully they'll sell me enough material to do it, otherwise have to buy a second kit.

Yeah it's odd that the A-pillars are excluded like that to me as well, and I plan the same to get the A-pillars wrapped. Going for the whole cab area in one of the silvers honestly to reject as much heat as possible and a roughly matching silver tint on the rear glass as well.