Anyone have a wrap on a car now?

Ewwgas

Active Member
Joined
Apr 29, 2025
Threads
4
Messages
25
Reaction score
27
Location
CA
Vehicles
1991 Miata
Title, who has wrap ownership experience?
 

JeffVA

Active Member
First Name
Jeff
Joined
May 2, 2025
Threads
3
Messages
39
Reaction score
65
Location
Roanoke VA
Vehicles
F-150
I just had my new SUV ceramic coated but while I was deciding I was also considering Paint Protection Film (PPF). Both offer great protection and PPF is pretty much the same thing as a vinyl wrap but it's clear. If you have to keep your vehicle outside then vinyl will only last between 3-5 years and will fade over time. Unless you keep it sealed it is also prone to staining. This is very noticable in the front due to bug splatter. If you use a good sealant this is less of a problem. Sun damage unfortunately is much harder to stop.

I'm curious to find out more about this composite material as information becomes available. Will it accept paint like a regular car? If panels are removable it should be easier to paint. I would much rather spend money on a metallic candy apple blue paint job that will last the life of the vehicle rather than a wrap I know I'll have to replace probably sooner rather than later
 

dcgray2

New Member
First Name
Don
Joined
Apr 24, 2025
Threads
0
Messages
4
Reaction score
7
Location
PA
Vehicles
Bronco
I have a 2021 Bronco that I had wrapped with XPEL Stealth PPF in October of 2021.

I've had it offroad numerous times in the woods of Pennsylvania through tight trails and even rubbing on rock faces.

XPEL PPF is about 8 mils thick. Standard wraps are usually 3 mils thick so it's made to take abuse.

I've done nothing special in the last almost 4 years. I try to wash the mud and grime off it within a week of going offroad.

I have a couple of TINY bubbles in one crease. And I have a tear through about 2 inches long were I rode a rock wall.

If it gets "pinstriped" by branches you can just pour some very hot water on it and it'll heal up.
Slate Auto Pickup Truck Anyone have a wrap on a car now? 1000001955
 

cvollers

Well-Known Member
First Name
Chip
Joined
Apr 25, 2025
Threads
1
Messages
97
Reaction score
55
Location
Bellevue WA
Vehicles
FJ Cruiser
I have a 2021 Bronco that I had wrapped with XPEL Stealth PPF in October of 2021.

I've had it offroad numerous times in the woods of Pennsylvania through tight trails and even rubbing on rock faces.

XPEL PPF is about 8 mils thick. Standard wraps are usually 3 mils thick so it's made to take abuse.

I've done nothing special in the last almost 4 years. I try to wash the mud and grime off it within a week of going offroad.

I have a couple of TINY bubbles in one crease. And I have a tear through about 2 inches long were I rode a rock wall.

If it gets "pinstriped" by branches you can just pour some very hot water on it and it'll heal up.
1000001955.jpg
Xpel is great stuff for wheeling.
 

bartflossom

Member
First Name
Hal
Joined
Apr 24, 2025
Threads
2
Messages
19
Reaction score
22
Location
Frisco, TX
Vehicles
Silver Maverick XLT Hybrid - "Dirk"
I wonder if that "starting at 500 dollars" is for a full wrap kit, or a partial wrap kit.
 

Shay

New Member
First Name
Sam
Joined
May 4, 2025
Threads
0
Messages
3
Reaction score
5
Location
Phoenix, AZ
Vehicles
Ford Maverick
I have had wraps on a couple of cars. Just as resilient as paint but easier to change or repair.
 

JeffVA

Active Member
First Name
Jeff
Joined
May 2, 2025
Threads
3
Messages
39
Reaction score
65
Location
Roanoke VA
Vehicles
F-150
I wonder who they are farming the wrap production out to.
If Slate is going to be as open source as they say they are then any "Wrap Shop" should be able to download the pattern and provide the wrap. I've seen some awesome wraps. I'm thinking candy apple blue metal flake
 

cvollers

Well-Known Member
First Name
Chip
Joined
Apr 25, 2025
Threads
1
Messages
97
Reaction score
55
Location
Bellevue WA
Vehicles
FJ Cruiser
If Slate is going to be as open source as they say they are then any "Wrap Shop" should be able to download the pattern and provide the wrap. I've seen some awesome wraps. I'm thinking candy apple blue metal flake
Great point. Opening up this part of the customization process seems like a really smart call.
 
 
Top