Custom Slatelets (3D Print STL files attached)

[skidoofast]

I have been so waiting for the first 3D model to show up. Is it one piece or multiple?

It’s a 3 piece, I had to re design the rims and I 3d printed the tires in TPU

 

[Letas]

It’s a 3 piece, I had to re design the rims and I 3d printed the tires in TPU

What's a guy gotta do to get his hands on one of these... assuming he doesnt have a 3d printer

 

[slateya]

What's a guy gotta do to get his hands on one of these... assuming he doesnt have a 3d printer

What’s a guy gotta do to get his hands on one of these if he has a 3D printer. 🤪

 

[skidoofast]

What’s a guy gotta do to get his hands on one of these if he has a 3D printer. 🤪

lol, I’m putting it together now, working on updating to a topper model now

 

[skidoofast]

What’s a guy gotta do to get his hands on one of these if he has a 3D printer. 🤪

what 3d printer do you have

 

[slateya]

what 3d printer do you have

A hand me over Sovol SV07. Single color. I am still learning but getting better. Easiest for me to use is STL file. I am using Ultimaker Cura for slicing.

The modelsook fairly printable for me. Might have some bridging issues at the wheel wells. I will start small and work up. Only PLA so far but have been wanting to try TPU. Pm me if you like.

 

[skidoofast]

Here are the STL files for the 3D Print Slate Pickup and SUV scale models. I combined the Rim and Tire so it can be printed all as one.

Pickup Model: https://www.slateforums.com/forum/attachments/slate-truck-stl-stl.37847/
SUV Model: https://www.slateforums.com/forum/attachments/slate-suv-model-stl-stl.37846/
Wheels: https://www.slateforums.com/forum/attachments/wheel-and-rim-stl.37848/

 

[Firstrax]

Corgi Slatelet!

 

[skidoofast]

made another slatelet design, not sure how well it will print might need to use the fine nozzle to print this one

 

[skidoofast]

I’m 1st Shift but decided to make one also

 

[Trace26]

I’m 1st Shift but decided to make one also

That's a pretty good fake! Almost scary how good.

 

[Mr. Slate]

I thought it would be fun to mount Lego figures and brick to the slatelet clip. so I remixed the clip to have modified lego studs. I also made a "SLATE" plaque as a proof of concept for interchangable clips & slatelets (no need for glue).

Link to models on Printables.com

 

[ROB C]

Here's a slatelet that explains why I'm getting one...

 

[EV Trek]

I thought it would be fun to mount Lego figures and brick to the slatelet clip. so I remixed the clip to have modified lego studs. I also made a "SLATE" plaque as a proof of concept for interchangable clips & slatelets (no need for glue).

Link to models on Printables.com

Why did you use the Tesla Font instead of the Slate Font?

 

[JRE]

Why did you use the Tesla Font instead of the Slate Font?

Because "slate" also spells "tesla" if you word scramble it.