Drive Unit / Motor supplier appears as Cascadia Motion (BorgWarner) in Slate prototype video

cadblu · 2025-06-08T08:13:10-0700

From this screen shot (00:37 seconds) it clearly shows a modified Cascadia Motion Integrated Drive Module. Cascadia is a US-based automotive supplier, subsidiary of BorgWarner, that develops and manufactures inverters, traction motors, and geartrains for various electric vehicle applications.

Earlier it was reported that the drive unit is produced by JJE Technologies, with facilities in Shanghai China and the US. While Slate was most likely experimenting with multiple suppliers during the development phase, let's hope that Slate continues to source from USA suppliers.

Slate Auto Pickup Truck Drive Unit / Motor supplier appears as Cascadia Motion (BorgWarner) in Slate prototype video cascadia-slate-driveunit

Slate Auto Pickup Truck Drive Unit / Motor supplier appears as Cascadia Motion (BorgWarner) in Slate prototype video cascadia

Dorbiman · 2025-06-08T10:37:21-0700

Good eye! Based on their website that looks like the iDM-190, found here. Seems like a higher peak output than Slate is advertising, so this may not represent the traction motor Slate uses for production models.

AZFox · 2025-06-08T11:57:30-0700

I doubt that's a Slate motor in the video.

It certainly isn't a Slate taillight.

AZFox · 2025-06-08T12:00:22-0700

By the way the video is one of the better ones because it's succinct and informative. Thanks for posting.

Dorbiman · 2025-06-08T13:09:54-0700

AZFox said:
I doubt that's a Slate motor in the video.

It certainly isn't a Slate taillight.

Good point. I am curious about some of the components in the Slate. Hopefully they’re relatively easy to source for long term maintenance and repair

cadblu · 2025-06-08T15:09:16-0700

AZFox said:
I doubt that's a Slate motor in the video.

It certainly isn't a Slate taillight.

I noted this as well. As I indicated it may have been an earlier prototype and Slate just slapped on generic tail lights from the parts bin. In other footage it definitely looks like platform, dash, and front end is legit.

Swinefuzz · 2025-06-08T15:27:46-0700

AZFox said:
I doubt that's a Slate motor in the video.

It certainly isn't a Slate taillight.

Yes.

However, it could be a Slate test vehicle. They don't necessarily look like the Slate Truck we've all seen, but a "Slateboard" unibody lacking the body panels or some other kind of mockup that roughly approximates what the Slate Truck would eventually be. It could be video from 18 months ago.

It could be out of a f'n Telo.

??Who knows??

Swinefuzz · 2025-06-08T15:46:50-0700

cadblu said:
I noted this as well. As I indicated it may have been an earlier prototype and Slate just slapped on generic tail lights from the parts bin. In other footage it definitely looks like platform, dash, and front end is legit.

Yes, there's a mix of legit and WTF, like stock footage of women giggling and eating pizza and shopping for jewelry and perfume. This YT channel is known for AI type of content. This isn't the first Slate video they've grunted out.

Swinefuzz · 2025-06-08T16:27:02-0700

Swinefuzz said:
Yes.

However, it could be a Slate test vehicle. They don't necessarily look like the Slate Truck we've all seen, but a "Slateboard" unibody lacking the body panels or some other kind of mockup that roughly approximates what the Slate Truck would eventually be. It could be video from 18 months ago.

It could be out of a f'n Telo.

??Who knows??

actually, it looks to be from SA test vehicle:

Slate Auto Pickup Truck Drive Unit / Motor supplier appears as Cascadia Motion (BorgWarner) in Slate prototype video slate_7591-1

...from this post:
https://www.slateforums.com/forum/t...ety-suspension-underbody-undercarriage.12646/

The dead giveaways are the roll bar, the door cut-out shape and the taillight. So... that Cascadia Motion component is indeed from a Slate tester.

bartflossom · 2025-06-08T17:12:00-0700

iDM-190 integrated system from cascadia motion looks like the photo.
https://www.cascadiamotion.com/idm-190.html

cvollers · 2025-06-08T17:17:31-0700

Swinefuzz said:
actually, it looks to be from SA test vehicle:

...from this post:
https://www.slateforums.com/forum/t...ety-suspension-underbody-undercarriage.12646/

The dead giveaways are the roll bar, the door cut-out shape and the taillight. So... that Cascadia Motion component is indeed from a Slate tester.

Can I get that test vehicle in AWD and a winch on the front?

GaRailroader · 2025-06-08T17:20:17-0700

I vaguely recall that they bought some test mules. Can't remember who the supplier was.

cvollers · 2025-06-08T17:38:03-0700

GaRailroader said:
I vaguely recall that they bought some test mules. Can't remember who the supplier was.

Mahindra Roxor. $30.6K for the all weather version.

Slate Auto Pickup Truck Drive Unit / Motor supplier appears as Cascadia Motion (BorgWarner) in Slate prototype video IMG_4137

evtruth · 2025-06-08T18:05:51-0700

Dorbiman said:
Good point. I am curious about some of the components in the Slate. Hopefully they’re relatively easy to source for long term maintenance and repair

Just having 90%+ American parts content should help with that.

evtruth · 2025-06-08T18:08:31-0700

cvollers said:
Can I get that test vehicle in AWD and a winch on the front?

I mean you could probably get close by pulling all the panels on a production model and getting the roll cage, lol.

Drive Unit / Motor supplier appears as Cascadia Motion (BorgWarner) in Slate prototype video

cadblu

Well-Known Member

Dorbiman

Active Member

AZFox

Well-Known Member

AZFox

Well-Known Member

Dorbiman

Active Member

cadblu

Well-Known Member

Swinefuzz

Well-Known Member

Swinefuzz

Well-Known Member

Swinefuzz

Well-Known Member

bartflossom

Well-Known Member

cvollers

Well-Known Member

GaRailroader

Well-Known Member

cvollers

Well-Known Member

evtruth

Well-Known Member

evtruth

Well-Known Member

Similar threads

Similar threads