Plywood 4x8 fit / loaded into Slate truck bed (video)

[Driven5]

They're just having a little fun making a few silly video answers to some customer questions. It's really quite refreshing.

 

[Sandman614]

They're just having a little fun making a few silly video answers to some customer questions. It's really quite refreshing.

yeah but for some reason other people with nothing better to do have to turn every thread in to "bUt MuH MaVErICk!!!!!!!" or "DID THEY CHECK THEIR LOCAL AND STATE LAWS BEFORE DRIVING SLIGHTLY OUT OF FRAME IN A CLOSED COURSE PARKING LOT?!?!?!"

must be a sad life. the rest of us appreciate this kind of content and are excited the company does stuff like this.

 

[KingCarlosXIII]

As someone who currently has a Maverick. Yes I haul plywood, lumber, yard waste, etc. It's a bed. Contrary to popular belief it just needs to be...a bed. Maverick was the darling of the reasonable sized truck community for the past 5 years, and they came up with some really exciting solutions in their design, but I'm very excited by Slate. I feel like as someone who drove a 93' Ranger 2-door as his first vehicle, Slate is what those small trucks of the 80's and 90's should have naturally evolved into had it not been for the big three pushing bigger and more expensive trucks that only get 5 miles to the gallon.

 

[E90400K]

My current pickup has a 5' 6" bed. The tailgate has two open positions (like the MuH MaVErICk!!!!!!! has), adjustable by moving the tailgate cables to the mid-position pins. The bed also has slots built into the bed walls that can hold either 2x4 or 2x6 boards to elevate any 4x8 sheet material above the wheel wells. My '87 Ranger STX with a 7' bed had slots in the bed walls for the same purpose. None of this is new for small and mid-sized pickups. The 14-second video was pointless, especially after Slate posted months ago 4x8 sheet sitting in the bed elevated above the wheel wells and providing the bed measurements at the time of reveal.