POLL: What are you most interested about with the Slate truck?

[RequiredInfo]

Okay, so we are discussing a future issue that may never come to fruition, then?

I do not think the regulations that mandate OBDII allow for manufacturers to use proprietary hardware closed from repair or replacement by non-OEM repair facilities; that is the whole impetus behind OBDII.

Perhaps there are loopholes with EV since EV do not fall under Federal emissions regulations, yet I think I recently read somewhere where CARB (i.e. California) is mandating OBDII-like repairability open source as it did for ICEV some 30+ years ago. I still doubt Slate is going to release repair information as open-source to the public considering the liabilities associated with potential electrocution risks working on high-voltage EV battery systems. Maybe they will.

In the Repair Pal thread it was reported that Slate says there will be no propriety manufacturer tools required to service the HV system (if I understand that correctly). I'm taking that with a grain of salt since I would think the unique architecture* the Slate EV battery will dictate specific battery system diagnostic tools (software at a minimum) to diagnose and service the battery.

*All manufacturer's EV batteries are comprised of unique architecture (in some form) using standard battery cells based on their service applications as a traction battery feeding a unique downstream EV drivetrain housed in unique individualized chassis.

There are several open BMS controllers for retrofits, grid packs, e-motos, etc. Orion makes ev-sized ones.

 

[sodamo]

Good point, I added it.

Thanks
upgraded my choices

 

[cadblu]

I was thinking “dent resistant plastic body panels” might be added to the list. I consider that a distinct feature that I’m actually looking forward to.

 

[GaRailroader]

I was thinking “dent resistant plastic body panels” might be added to the list. I consider that a distinct feature that I’m actually looking forward to.

Me too. Living in the southeast I’ve had multiple vehicles get hail damage. I’d appreciate the plastic panels for that reason alone.

 

[SichuanHot]

Eh, I don't see it this way, I think this whole right to repair issue is overblown. I have been repairing my own cars for 45+ years and have never found any of the manufacturers of my vehicles withholding information or parts that has prevented me from maintaining my fleet.

I have a subscription to All-Data for some of my cars and 3rd-party service information for others in my fleet. My newest, MY 2022, has been maintainable so far; just oil changes at this point. The dealership sells the oil and oil filters, and the vehicle uses standard metric fasteners.

And to be contrary, auto manufacturers make a significant profit from the public maintaining and repairing old cars via parts sales and dealership-level maintenance/service.

I don't see it as overblown at all. Older cars from the early 2000s from the Bentley Arnage to the humble Toyota Celica were all pretty easy to repair because they didn't have any overly complicated hardware that couldn't be accessed with a basic set of tools. Now all the infotainment systems that are baked into crucial parts of the car's function are found in basically every car that make DIY repair without oem tools a bear. I wouldn't touch any modern Mercedes with the MBUX system because of that.

Granted, I'll give you that some cars are still easier than most like stripped down Fords and the GR86/BRZ.